logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Compounding Vessel
Created with Pixso. Polishing Distribution System for Purified Water and Water for Injection, In-Loop Final 0.2 µm Membrane and UV Barrier at Point of Use, Sanitary 316L, GMP Clean Utilities

Polishing Distribution System for Purified Water and Water for Injection, In-Loop Final 0.2 µm Membrane and UV Barrier at Point of Use, Sanitary 316L, GMP Clean Utilities

Brand Name: LINGYAO
Model Number: LYPYG-1000
MOQ: 1
Price: 5000-50000uSD/unit
Delivery Time: 30-90 days
Payment Terms: L/C,D/A,D/P,T/T
Detail Information
Place of Origin:
China
Certification:
CE
Name:
Compounding Vessel
Working Volumi:
1000L
Stirrer Type:
Filter
Material:
316L For Liquid Contact
Jacket:
Dual-duty
CIP:
Available
SIP:
Available
Valves:
Pharmaceutical
PLC:
Complies With FDA 21 CFR Part 11
HML:
Complies With FDA 21 CFR Part 11
Packaging Details:
carton,wood,carton,pallets
Supply Ability:
5-20 units per month
Product Description

       Polishing Distribution System for Purified Water and Water for Injection, In-Loop Final 0.2 µm Membrane and UV Barrier at Point of Use, Sanitary 316L, GMP Clean Utilities

From a "Pump-and-Pipe Job" to an Engineered Utility Plant
     Most water distribution problems are not quality problems at the source — they are architecture and delivery problems. A loop that was welded on site, sized for one workshop but later stretched to five, run open-loop at night and monitored only by a local panel, will drift, consume excess energy and fail inspection long before the generator does. This system is sold the opposite way: it is a factory-built, functionally tested utility plant with a deliberate loop architecture, an in-line polishing stage and a digital control layer, so that the water quality proven at FAT is still there two years later at the furthest use point.
Delivery Model: Factory-Built, Plug-and-Connect, Containerized
     The storage vessel, distribution and return pumps, polishing skid, valves, instrumentation and control panel are assembled, piped, wired and dry-tested on a common frame in our workshop, then shipped as one or more modules. On site the contractor's scope collapses to: set the skid, connect four utility interfaces (feed, product, return, power/steam), and run the commissioning protocol.
Delivery Option What It Means For Your Project
Single integrated skid Fastest install for one building / moderate demand; one lift, one hook-up
Modular split skids Vessel block + pump/polishing block + panel block for tight door/crane access
Containerized plant Weather-proofed, pre-piped unit shipped as a module for greenfield or phased sites; relocatable
Witnessed factory test Flow, pressure, control-logic and (where applicable) a simulated sanitisation cycle run before shipping — issues are fixed in the factory, not in your shutdown week
Digital & Lifecycle Layer
    The control is built to be a plant asset you can see and manage, not a black box on the wall:
  • SCADA / OPC-UA integration so the water plant reports into your existing building or MES layer instead of living on an island panel.
  • Remote HMI & diagnostics — our engineers can read alarms, trends and run-hours off-site, cutting service response time and unplanned downtime.
  • Trend & alert handling on the loop's key signals, so a drifting branch is visible as a trend before it becomes a deviation.
  • Energy-optimised running — variable-speed recirculation and zone-aware pumping so the loop is not over-pumped at night or during low demand; on a 24/7 clean utility this is the line item that quietly dominates your operating cost.
  • Lifecycle service — documented spare-parts family, gasket/seal kits, lamp and cartridge consumption plan, and an upgrade path (add a sub-loop, add a polishing stage) when the plant expands.
Optional Front End: Mechanical Pre-Treatment
    Where the plant is fed from mains or well water, a mechanical filter train (multi-media / activated carbon / manganese sand, used alone or combined per the feed-water report) can be bundled ahead of the purification unit to protect it. It is offered here purely as an optional tie-in — the core of this listing is the distribution architecture above.
Build Integrity
     Product-contact wetted parts are low-carbon SUS 316L with a sanitary internal finish; all connections are hygienic (orbital-welded, clamp and diaphragm face) with compatible sanitary elastomers, and the whole skid is finished for a clean-utility room, not a plant corridor. This is the metal-level guarantee behind the architecture: a well-zoned, well-monitored loop only holds if the wetted path itself cannot shed, corrode or stand.
Usage Scenarios
     Greenfield and retrofit clean-utility rooms for injection / large-volume-parenteral, oral-liquid, ophthalmic, biologics and antibiotic suites; multi-building campuses that need zoning from shared storage; regulated plants wanting SCADA-integrated, documented, remote-supportable water utilities; and EPC contractors who want a factory-tested module instead of a field-welded loop.
Frequently Asked Questions (FAQs)
  • Q: Why a factory-built module instead of piped on site?
    A: Factory assembly means the loop is pressure-tested, wired and functionally run before it reaches you. On-site scope drops to hooking up utilities and commissioning, so installation is faster and far fewer quality problems surface during your shutdown window.
  • Q: My plant has several buildings and grades. Do I need one loop or many?
    A: Usually one storage with multiple dedicated loops. Zoning by grade, distance and demand keeps pressure stable at the far points, lets you isolate one area for maintenance, and prevents a single contamination event from affecting the whole plant. We size the zoning from your use-point map.
  • Q: What is "in-loop polishing" and do I already have it?
    A: It is a final barrier (0.2 µm membrane and/or UV) placed in the loop before the use points, so water is re-polished on the way to the machine, not only at the source. It complements your sanitisation regime rather than replacing it.
  • Q: Can it plug into our existing controls?
    A: Yes. The skid exposes SCADA / OPC-UA points and supports remote diagnostics, so it reports into your central system and our engineers can troubleshoot off-site — this is what keeps a 24/7 utility running.
Delivery & Support
     Each module ships with nameplate, material certificates, pressure/leak and functional test records, a witnessed FAT, P&ID, general-arrangement and electrical drawings, control-point list, commissioning protocol and an English operation manual. On-site supervision, commissioning, zoning/sizing support from your use-point map, SCADA tie-in, operator training and a documented spare-parts and consumables plan are available.