logo
Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Compounding Vessel
Created with Pixso. High-Capacity Backwashable Mechanical Filter Skid for Industrial Pharmaceutical Water Treatment, Rubber-Lined Carbon Steel or Stainless Multi-Vessel Parallel, Zero Consumable Media

High-Capacity Backwashable Mechanical Filter Skid for Industrial Pharmaceutical Water Treatment, Rubber-Lined Carbon Steel or Stainless Multi-Vessel Parallel, Zero Consumable Media

Brand Name: LINGYAO
Model Number: LYPYG-1000
MOQ: 1
Price: 5000-50000uSD/unit
Delivery Time: 30-90 days
Payment Terms: L/C,D/A,D/P,T/T
Detail Information
Place of Origin:
China
Certification:
CE
Name:
Compounding Vessel
Working Volumi:
1000L
Stirrer Type:
Filter
Material:
316L For Liquid Contact
Jacket:
Dual-duty
CIP:
Available
SIP:
Available
Valves:
Pharmaceutical
PLC:
Complies With FDA 21 CFR Part 11
HML:
Complies With FDA 21 CFR Part 11
Packaging Details:
carton,wood,carton,pallets
Supply Ability:
5-20 units per month
Product Description

       High-Capacity Backwashable Mechanical Filter Skid for Industrial Pharmaceutical Water Treatment, Rubber-Lined Carbon Steel or Stainless Multi-Vessel Parallel, Zero Consumable Media
   

Why a Pre-Treatment Filter Is the Cheapest Insurance in a Water System
     Downstream assets — RO membranes, EDI stacks, multi-effect distillers, pure-steam generators — are the expensive heart of a pharmaceutical water plant. They are also fragile: suspended solids abrade and blind membrane surfaces, free chlorine oxidises and permanently destroys thin-film polyamide elements, iron and manganese catalyse irreversible membrane fouling and stain stainless surfaces, and hardness scales onto heat-transfer tubes and forces distiller shutdowns for acid cleaning. A properly sized and media-selected pre-treatment filter removes or neutralises each of these threats before they reach the equipment that costs a hundred times more to replace. The filter itself has no consumables — the media is regenerated by backwash and lasts years — so the insurance premium is close to zero.
Feed-Water Diagnostic Matrix — Which Media You Need
There is no universal filter. The correct media combination is driven entirely by your raw-water analysis. Use the matrix below as a starting point; send us your feed-water report and we will confirm the bed depths, vessel count and flow rates.
Feed-Water Problem Symptom if Left Untreated Correct Media Removal Mechanism
Turbidity / suspended solids > 5 NTU Membrane flux decline, distiller tube fouling Multi-media (anthracite + sand + garnet) Depth filtration — coarse-to-fine layers capture progressively smaller particles
Free chlorine > 0.1 ppm Irreversible oxidation of RO polyamide membrane Activated carbon (coconut-shell or coal-based) Catalytic reduction: Cl₂ + C → Cl⁻ + surface oxide, followed by adsorption
Iron (Fe²⁺/Fe³⁺) > 0.3 ppm Orange-brown membrane fouling, stained product-contact surfaces Manganese sand (greensand + MnO₂ coating) Catalytic oxidation of dissolved Fe²⁺ → insoluble Fe³⁺, filtered out in the same bed
Manganese (Mn²⁺) > 0.1 ppm Black membrane and tank staining, catalytic degradation of chlorine residual Manganese sand Same catalytic-oxidation mechanism as for iron
Hardness / scaling tendency Distiller tube scale, reduced heat transfer Optional water softener (cation-exchange resin) Na⁺ / Ca²⁺ / Mg²⁺ exchange, regenerated with brine
      In practice, most pharmaceutical water plants need two or three vessels in series: multi-media first to strip turbidity, then activated carbon for chlorine, then (where iron or manganese is present) manganese sand. The vessels can be stacked in parallel for higher flow or installed as a single skid with a shared header and a common multi-port valve backwash manifold.
System Integration & Options
  • Dedicated feed booster pump & variable-frequency drive to hold constant filtration rate across the filter-run (compensates for rising ΔP)
  • Differential-pressure transmitter for automatic backwash initiation and breakthrough alarm
  • In-line turbidity meter post-filter as the first quality gate before the RO or distiller
  • Chlorine ORP analyser between carbon vessels to verify chlorine removal is holding
  • Steam / hot-water sanitisation port for microbiological control on the carbon bed (where biogrowth is a concern)
  • Common skid frame for multi-vessel trains, with integrated header, backwash manifold, instrumentation panel and PLC
Usage Scenarios
      Installed immediately downstream of the raw or municipal water source and upstream of any purification unit: as the front end of a single- or double-pass RO/EDI system, ahead of a multi-effect distiller or pure-steam generator feed tank, on surface-water or well-water intakes where turbidity, iron, manganese or chlorine vary seasonally, and in boiler-feed pre-treatment where suspended solids and residual hardness must be reduced before softening or deaeration. Used across pharmaceutical water rooms, food & beverage process water, cosmetics, microelectronics ultrapure pre-polishing, and industrial closed-loop cooling make-up.
Frequently Asked Questions (FAQs)
  • Q: How do I know which media my plant actually needs?
    A: It depends on your raw water. Turbidity calls for multi-media, chlorine calls for activated carbon, iron and manganese call for manganese sand. Most sites need two or three vessels in series. Send us your feed-water analysis and we will confirm the combination, bed depths and vessel count.
  • Q: How often do I need to replace the media?
    A: Granular media does not "consume" like a cartridge filter — it is regenerated by backwash. Typical media life is 3–5 years for multi-media and manganese sand, 2–3 years for activated carbon (after which adsorption capacity saturates and the carbon must be reactivated or replaced). The only moving part needing attention is the multi-port valve or actuator seals.
  • Q: Rubber-lined steel or stainless — which one should I buy?
    A: For large vessel diameters or aggressive feed water with high chloride or acidic character, rubber-lined carbon steel is the cost-effective and corrosion-safe choice. For product-water-contact duty or smaller vessels, SUS 304 or 316L gives a cleaner, sanitiseable surface without the lining-integrity inspection burden. Tell us your water chemistry and we will recommend.
  • Q: Can these filters be used in parallel for high flow?
    A: Yes. The standard scaling method for pharmaceutical water plants is to run N+1 vessels in parallel, so one can be offline for backwash or media change while the remaining units hold full plant flow without interruption. Each vessel is fitted with independent inlet/outlet and backwash connections on a common header.
Delivery & Support
      Each filter vessel or filter train ships with nameplate, hydrostatic pressure test certificate, material certificates (EN 10204 3.1 for stainless, lining holiday test report for rubber-lined), internal strainer drawings, media loading schedule, backwash procedure, P&ID for the complete train, general-arrangement and piping drawings, electrical diagram (where automated) and a full English operation and maintenance manual. Installation supervision, commissioning, media loading support, operator training and spare strainer / valve / instrumentation kits are available.