| Brand Name: | LINGYAO |
| Model Number: | LYPYG-400 |
| MOQ: | 1 |
| Price: | 5000-50000uSD/unit |
| Delivery Time: | 30-90 days |
| Payment Terms: | L/C,D/A,D/P,T/T |
Equipment Highlights Engineered for flexible batch compounding in cGMP cleanrooms, this 400L mobile stainless steel manufacturing vessel features a variable-speed vortex agitator (operating down to ≤50L), a removable multi-port nitrogen sparge pipe for deoxygenation, a self-draining sloped bottom, and full-coverage 360° rotary CIP spray cleaning
Technical Specifications
| Parameter | Specification |
| Nominal Working Volume | 400 Liters (Operating Range: ≤50 L to 400 L) |
| Vessel Geometry & Mobility | Vertical cylindrical tank with upper/lower dished heads, self-draining sloped bottom, and stainless steel support frame with lockable castors |
| Product-Contact Material | 316L Stainless Steel, internally finished to ≤0.8 µm Ra (welds ground and polished flush) |
| Exterior Material & Finish | 304 or 316 Stainless Steel, finished to ≤1.2 µm Ra |
| Operating & Design Temperature | Operating: 15°C to 90°C; Design: up to 120°C |
| Operating & Design Pressure | Operating: Atmospheric; Design: Full vacuum to min. +3.0 bar(g) |
| Agitation & Rotation Control | Variable-speed agitator (mechanical seal or magnetic drive) with vortex mixing capability, rotation speed monitoring, and external control panel interface |
| Nitrogen Sparging System | Removable fixed-length perforated sparge pipe (1.5" Tri-Clover tank port, 0.5" Tri-Clover N2 inlet) for multi-point deoxygenation |
| Sanitary Connections & Sight Glass | 1.5" Tri-Clover ports for Purified Water (PW) inlet, vent filter, and spare connection; manhole/inspection hatch with LED-illuminated sight glass |
| CIP & Safety Devices | 360° rotary spray ball covering 100% of wetted surfaces; rupture (bursting) disc with low-level discharge pipe; interlocked inspection cover and safe-restart electrical protection |
| Utility Requirements | Electrical: 400 VAC, 50 Hz, 3-Phase; Compressed Air: 6–8 bar; Site-supplied hot/chilled water and GMP drain |
| Design & Safety Standards | EU GMP Guidelines, ISPE Baseline Guide, PED 2014/68/EU, IEC 60204-1, CE / UKCA marked |
![]()
Cleanroom Deployment & Mobility Designed for multi-product pharmaceutical suites and sterile liquid manufacturing facilities where equipment agility is essential
Process Capabilities & Applications
Low-to-Full Volume Aqueous Blending: Achieves consistent vortex mixing across an 8:1 batch turndown ratio (from ≤50 L minimum fill up to 400 L nominal capacity) to homogenize aqueous pharmaceutical formulations
Dissolved Oxygen Removal (Nitrogen Sparging): Uses a precision-positioned perforated sparge tube to disperse fine nitrogen bubbles across multiple zones, preventing oxidation without creating disruptive single large bubbles at the vessel base
Zero-Pool Drainability & Automated CIP: Features a sloped bottom with a lowest-point outlet and zero dead-legs exceeding GMP thresholds, ensuring complete product recovery and thorough drainage after 360° rotary spray-ball cleaning
Technical Questions & Answers (FAQs)
Can this 400L manufacturing vessel mix small-scale batches effectively? Yes. The agitator impeller and drive motor are sized to generate a stable mixing vortex across the entire operating range—from a minimum working volume of ≤50 liters up to the full 400-liter capacity—while providing real-time rotation monitoring
How does the nitrogen sparging assembly protect oxygen-sensitive liquid products? The vessel incorporates a removable sparge pipe connected via a 1.5" Tri-Clover top port and 0.5" Tri-Clover nitrogen supply fitting, featuring distributed micro-holes that purge dissolved oxygen evenly without interfering with the agitator impeller
What pressure ratings and overpressure safeguards are built into the tank? Manufactured in accordance with PED 2014/68/EU, the vessel is rated from full vacuum up to a minimum design pressure of +3.0 bar(g) and 120°C, and is fitted with a rupture (bursting) disc routed to a low-level exhaust pipe alongside an interlocked inspection hatch
How does the vessel ensure complete product recovery and cleanability? All product-contact 316L stainless steel surfaces are polished to ≤0.8 µm Ra with flush-ground welds, while a sloped self-draining bottom with a lowest-point discharge valve prevents liquid pooling during product transfer and 360° CIP cycles
Our equipment is engineered to meet strict international regulatory standards, ensuring seamless integration into your facility's quality management systems.
Complete Validation Documentation (DQ/IQ/OQ/PQ & FAT/SAT): We provide comprehensive engineering and validation deliverables—including General Arrangement (GA) drawings, P&IDs, electrical schematics, instrument lists, EN 10204 material and surface finish certificates, calibration records, FAT/SAT execution, and full DQ/IQ/OQ/PQ protocol support
GMP & Pressure Directive Compliance: Built strictly to EU GMP Guidelines, ISPE Baseline Guides, PED 2014/68/EU, IEC 60204-1, and CE/UKCA requirements
Data Integrity & Traceability: Designed to support FDA 21 CFR Part 11 requirements. Our control architecture supports secure multi-level user access, electronic audit trails, rotation speed logging, and seamless integration into your facility's SCADA/MES or external control panels