Ampoule Washing 20ml Filling Sealing Line Dry-Heat Sterilization, 40000 pcs/h Independent Rinsing AGF-20S

Pharmaceutical companies expanding injectable product portfolios face the dilemma of purchasing multiple specialized lines for different 20ml formats versus compromising with a single flexible line that requires extensive changeover time. Neither option optimizes capital efficiency for facilities producing 5-8 different injectable SKUs across 1-20ml ampoule formats.

Single-format production lines achieve 85-92% OEE (Overall Equipment Effectiveness) for their target 20ml format but require 8-12 hours of changeover time between different ampoule sizes. Multi-format flexible lines reduce changeover to 30-60 minutes but typically achieve only 65-75% OEE due to the engineering compromises of universal tooling. Pharmaceutical manufacturers need format-specific modules with rapid exchange capability to maintain >80% OEE across all ampoule sizes.

The modular architecture of our 20ml ampoule line uses format-specific quick-exchange modules for ampoule infeed, washing needle arrays, filling pump cassettes and sealing burner assemblies. Each module is pre-calibrated and validated offline, then exchanged on the production line in 15-25 minutes using tool-free quick-release clamps. This achieves >82% OEE across all ampoule formats while maintaining format-specific optimization without the compromises of universal tooling.

• Synchronized Filling and Flame Sealing: Servo-controlled Z-axis nozzle retraction and burner ignition synchronized at 1ms update rate with ±0.5ms timing precision. 2-color IR pyrometer (200Hz) provides real-time glass temperature feedback for dynamic burner height adjustment at 0.05mm resolution.
• Automatic Ampoule Feeding and Transfer: Servo-driven starwheel with individual spring-loaded 3-point centering pockets self-adjusts to actual ampoule diameter (±0.5mm tolerance). Inductive proximity sensors detect missing or misaligned ampoules within 5ms at the transfer point.
• HMI Integrated Line Control: S7-1500 PLC with 10-inch color touchscreen stores 50 product recipes. OPC-UA server capability logs all critical process parameters at 10Hz to an onboard SQL database with auto-generated 21 CFR Part 11 compliant electronic batch records.
• Automatic Fault Display and Diagnostics: Multi-sensor jam detection combining photoelectric sensors (0.1ms), inductive pocket sensors and 200fps camera frame-difference analysis triggers localized emergency stop within 3ms. HMI displays root-cause diagnostics with guided recovery procedures.
• Whole-Line Breakage Rate ≤1%: Hardened 316L stainless steel (Rockwell C 40-45) with electropolished Ra ≤0.4μm finish on all glass-contact surfaces prevents fragment embedding. Validated ≤1% breakage rate across 1,000,000+ ampoule production qualification runs.
• Compact Monoblock Architecture: All utilities integrated within the machine chassis at 6500mm * 1800mm footprint—40-50% floor space reduction versus separate machines. Pre-plumbed internal water, gas and electrical distribution eliminates cleanroom utility trenches.

For 20ml ampoule production at 40000 pcs/h, this model suits facilities producing 320-640k ampoules per single/double shift. Select this capacity tier when your annual demand falls between 80-160 million ampoules. For start-up or clinical trial supply with lower initial volumes, consider our 30000 pcs/h variant. For high-volume commercial manufacturing, step up to the 40000 pcs/h model. Verify ampoule dimensional conformance to GB 2637 or ISO 9187, and confirm your product viscosity is <200 cP at filling temperature for optimal ±0.5% accuracy.

Suitable for pharmaceutical injectable products requiring aseptic processing in 20ml ampoule format. Ideal for hospital pharmacy sterile compounding centers, contract manufacturing organizations (CMOs) serving generic injectable markets, veterinary pharmaceutical manufacturers, and research institutions producing clinical trial materials under GMP conditions. Compatible with aqueous solutions, oil-based formulations, and suspensions with viscosity below 200 cP at filling temperature.

Q: Is the line compatible with CIP/SIP systems?
A: The product-contact fluid path (ceramic pistons, 316L manifolds, silicone tubing and filling needles) supports Clean-in-Place with automated wash cycles using 75°C WFI. All product-contact components are designed for tool-free disassembly in under 5 minutes for manual cleaning and autoclave sterilization at 121°C for 30 minutes.

Q: What glass particulate control measures are in place?
A: Five-layer defense: (1) dual-frequency ultrasonic washing removes >99.5% of particles; (2) inline camera inspection rejects ampoules with residual contamination; (3) all glass-contact surfaces are hardened 316L with Ra ≤0.4μm to prevent fragment embedding; (4) ISO 5 laminar flow prevents airborne recontamination post-wash; (5) 100% vacuum decay seal testing ensures no glass migration post-sealing.

Q: What utility requirements must the facility provide?
A: Water for Injection (WFI) at 2.5 bar and 65°C ±2°C with <1.3 μS/cm conductivity; compressed air at 6 bar, oil-free, filtered to 0.01μm with dew point ≤-40°C; natural gas (or propane) at 50 mbar for flame sealing; 380V/50Hz 3-phase electrical supply, 25-45 kVA depending on tunnel length; clean dry compressed air for pneumatics at 6 bar. All utility consumption rates are specified in the installation qualification documentation.

Q: What is the typical IQ/OQ/PQ validation timeline?
A: Site acceptance testing requires 5-7 working days covering mechanical commissioning, sterilization cycle verification with biological indicators (Bacillus atrophaeus spores), and three consecutive media-fill runs per ISO 13408-1. A complete validation documentation package with executed protocols and raw data is provided.