The use of spray filling machine precautions mainly include the following aspects:

First, preparation and inspection before use

1. Machine inspection:

- Before using the spray filling machine, the crank handle should be used to turn the machine, check whether the rotation is abnormal, and confirm that the machine is in good condition before starting.

- Check whether the random technical data is complete, confirm whether the machine is damaged during transportation, and solve the problem in time.

- Check that all components are complete and working properly, especially key components such as nozzles and liquid storage tanks.

2. Liquid preparation:

- Ensure that the liquids used are non-toxic and harmless and comply with national quality standards.

- Understand the properties of the liquid, such as viscosity, corrosion, etc., in order to choose the appropriate nozzle and filling speed.

Second, the operation specification in the process of use

1. Correct installation and adjustment:

- Install the nozzle correctly according to the instructions and ensure that the nozzle is fully connected to the machine.

- Adjust the parameters of the sprayer according to the need, including spray volume, spray Angle and atomization size, to achieve the best use effect.

- Adjust the filling machine, should use the correct tools, avoid using too large tools or disassembling too difficult parts, so as not to damage the machine or affect the performance of the machine.

2. Filling operation:

- Fill the reservoir of the spray filling machine with the appropriate amount of liquid, taking care not to exceed the maximum range specified by the machine.

- Turn on the switch of the spray filling machine, after the machine starts, place the bottle on the tray of the filling machine, and start filling in automatic or semi-automatic mode.

- During the filling process, pay attention to the operation of the machine to ensure that the filling amount is accurate and no leakage.

3. Safe operation:

- During use, it is strictly forbidden to have grease, liquid or glass debris on the machine, so as to avoid damage and corrosion of the machine.

- Regularly check whether the rotation direction of the pump shaft is correct, whether the rotation speed is uniform, to avoid abnormal phenomena such as jamming and abnormal sound.

- Avoid using water sources with high sediment content for sprinkler irrigation, so as not to wear the impeller of the pump and the nozzle of the nozzle.

Third, maintenance and maintenance after use

1. Cleaning work:

- The machine should be cleaned in time after use, especially in the production process of liquid or glass debris and other debris, to avoid corrosion of machine parts.

- Clean the machine regularly with water, avoid using chemicals, so as not to damage the surface of the machine or affect the performance of the machine.

2. Lubrication and fastening:

- Lubricate each lubricating part on time to ensure good lubrication and normal operation.

- The loose parts of the unit should be tightened in time to prevent the normal operation of the machine from being affected by loosening.

3. Long-term storage:

- If the machine is not used for a long time, the water stored in the pump body should be discharged, the water pump, nozzle and other parts should be removed, the water stains should be wiped and the oil assembly should be coated, the import and export parts should be wrapped and stored in a dry place.

- The pipe should be washed and dried (hose rolled into a disc) and placed in a cool and dry place to avoid deformation or aging caused by exposure to sunlight and rain.

In summary, the precautions for the use of the spray filling machine cover many aspects such as preparation before use, operation specifications during use, and maintenance and maintenance after use. Following these considerations can ensure the proper operation of the machine, extend the service life and increase productivity.